AGCO Corporation Price & Performance (AGCO)

These risks include, but are not limited to, adverse developments in the agricultural industry, supply chain disruption inflation, tariffs, weather, commodity prices, changes in product demand, the possible failure to develop new and improved products on time, [indiscernible] premium technology and smart farming solutions, within budget and with the expected performance in price benefits, difficulties in integrating the PTX Trimble business, in a manner that produces the expected financial results introduction of newer improved products by our competitors, and reductions in pricing by them. The war in The Ukraine, difficulties in integrating acquired businesses and in completing expansion and modernization plans, on time and in a manner that produces expected financial results. And adverse changes in the financial and foreign exchange markets. Actual results could differ materially from those suggested in these statements. Further information concerning these and other risks is included in Agua's filings with the Securities and Exchange Commission, including its Form 10 ks for the year ended December 31, 2023 and subsequent Form 10 Q filings. AGCO disclaims any obligation to update any forward looking statements except as required by law. Later today, we'll make a replay of this call available on our corporate website. On the call with me this morning is Eric Kansodia, our Chairman, President and Chief Executive Officer Damon Adia, our Senior Vice President and Chief Financial Officer.

With that, Eric, please go ahead. Thanks, Greg, and good morning. Earlier today, AGCO reported fourth quarter results for 2024. Where we delivered a strong 9.9% adjusted operating margin. And $1.97 in adjusted earnings per share on sales that were down 24% from 48.9% adjusted operating margin $7.5 in adjusted earnings per share and sales that were down 19% from 2023. The adjusted operating margin performance is by far our best performance in an industry downturn What makes it more impressive is that the North American industry decline in 2024 was the worst single year decline since the downturn in 02/2009. Associated with the financial crisis. Our margin resiliency in this challenging environment is clear evidence We have structurally improved the company through our ongoing transformation efforts. Over these past years. I want to take a moment to thank the AGCO team around the world for delivering such strong results for the year. Despite a challenging and dynamic macro environment and at the same time with significant portfolio shifts, that occurred in our business. The organization teamed up and put Farmers First reinforcing Agco as the most trusted partner for industry leading smart farming solutions. 2024 was a transformative year for AGCO AGCO.

We closed the largest AgTech deal in our industry's history. With the PTX Trimble joint venture And we also exited a non core part of our business by divesting the majority of the Green and Protein business. These portfolio changes helped us enhance our strategic ambitions and allow AGCO to focus on agricultural machinery, and precision ag technology. These strategic changes will also provide margin tailwinds for us over the long term as we outlined in our Analyst Day in December. On the Precision Technology side of our business, we combined all our brands under the newly launched TTX brand so that we can swiftly unlock synergies across the enterprise and grow Precision Ag sales to 02/2029. We have already demonstrated tremendous progress in 2024, where we now have over 1,000 PTX dealers all while continuing to foster relationships with over 100 OEMs Looking to the future, we know our independent retrofit dealer network is an absolute key differentiator for us that provides unmatched product expertise and support to farmers regardless of the equipment brands they prefer.

Autonomy, targeted spraying and offboard technologies will become more mainstream in the coming years. AGCO is poised to partner with farmers at any point in their technology journey The depth of our product portfolio and unique consultative go to market approach allows us to offer a wide variety of products for any brand and vintage machinery and this is a very difficult thing to replicate, In addition, given our Farmer First focus we also rolled out our Farmer Core initiative, in 2024. And further streamlined our distribution network by partnering with some of the greatest dealers so that we can best serve farmers on farm online or on-site at the dealership. The way they want to be best served. The Fed portfolio in North America comes with an industry leading uptime and our FarmerCore strategy is designed to help deliver that uptime. We expect vent coverage in North And South America continue its growth trajectory and reach approximately 82% in 2025 through these continued efforts. The quarter wasn't without challenges however. The year inventories remain higher than target going into 2025. On a weighted average basis, we have between one and one point five months of excess dealer inventory to work through.

To address this, we are planning to significantly under produce again in 2025. Although we anticipate further declines in large ag machinery volumes in 2020 Recent sentiment surveys and many of our recent interactions with farmers show a sense of cautious optimism that is an improvement from where we were just six months ago.

Recent positive news around the stock to use ratios, have improved farmers' expectations about future profitability. The byproduct of this is a back half weighted outlook for ADCO. To best position ourselves in this environment, we anticipate more significant production cuts in the first half of the year offset by modest growth in production hours in the back half as we lap easier comparables. Finally, we will see cost savings begin to materialize in earnest around mid-twenty twenty five as our rightsizing transformation We expect these efforts to mitigate some of the weak industry demand. Despite a lower sales forecast and significant underproduction, we expect higher and more resilient margins compared to past cycles due to the structural improvements in our business. Slide four details industry unit retail sales by region for 2024. Global industry retail sales of farm equipment continued to be weak in all of AGCO's key markets. We expect the bottom of the cycle to occur in 2025. North American industry retail tractor sales decreased 13% during 2024 compared to the previous year. Sales declines are relatively consistent across the horse parts categories with higher horsepower categories declining more in recent months. Combined unit sales were down 22% in 2024 compared to 2023.

Lower projected farm income and a refreshed fleet is expected to pressure industry demand even more in 2020 resulting in weaker North American industry sales compared to 2024 particularly in larger equipment. Brazil industry retail tractor sales decreased 4% and combined sales decreased 33% during 2024. Compared to the previous year. Farm acreage and Brazil increased only modestly in 2024 After five years of more significant growth, lower commodity prices, rising farmer debt, and reduced demand from China created caution among Brazilian Industry demand is expected to remain effectively flat in 2025 due to mixed market dynamics. As with other cycles, industry demand will recover. It's a matter of when not if. AGCO will benefit from the long term growth of Agricultural Equipment segment thanks to a growing population, and a middle class with diets that consist of greater amounts of protein. With the actions we took in 2024, our consistent Farmer First focus we have positioned ourselves very well to capitalize on the growth of Precision Ag is needed to raise yields and meet the world's growing agricultural needs. [indiscernible] AGCO's factory production hours are shown on Slide five. We have eliminated grain and protein production hours from 2024.

Significant production cuts were made in all regions in quarter four twenty twenty four. With the biggest reductions occurring in South America, and North America. Given the continued weakening industry conditions, we reduced production as sales in the quarter were below our expectations. Our production hours were down approximately 33% in the quarter four twenty twenty four. Versus low levels in the quarter four of twenty twenty three and down approximately 28% on a full year basis versus the year of 2023 at a global level. We remain laser focused on reducing dealer inventories as quickly as possible in 2025 Given the current soft demand environment, and elevated dealer inventory levels, Sequentially from quarter three to quarter four twenty twenty four, we saw modest reductions in dealer inventory, but we still have work to do. Primarily in North America and South America. We are projecting twenty twenty five production hours between 1520% lower than 2024. With the North America region showing the biggest decline. We expect quarter one twenty twenty five production hours to be down between 3540% versus quarter one of twenty twenty four. Our plan is front loaded and aggressive to get inventory rightsized quickly.

Our current outlook for 2025 assumes North America and South America will result in production less than retail demand at least through the first half of twenty twenty five. Diving into the regional breakdown, In Europe, we ended 2024 with fewer inventories at just over four months supply. Respectively in line with where we'd like Trent is under this average and Massey Ferguson and Walter are slightly above.

The near target dealer inventory level in Europe is a real positive for ADCO AGCO the significant exposure to the region. In South America, we reduced the number of units on hand at the dealers by over 8% from quarter three level.

However, given the forward outlook, dealers are still holding around five months of supply versus our target level of three months. We anticipate underproducing retail demand at least through the first half of twenty twenty five to further reduce dealer inventory levels. [indiscernible] the units on hand at the dealers by approximately 7% from quarter three level. However, given the challenging outlook in 2025, we are still approximately nine months of supply versus our six months target. The current environment will result in a significantly lower production levels at least for the first half of twenty twenty five. Moving to Slide six, where you'll see our three high margin growth levers aimed at improving our mid cycle operating margins to our new target of 14% to 15% by 2029, and outgrowing the industry by 4% to 5% annually. This demonstrates that we are a much stronger company that has less variability throughout the business cycle. Higher to mid cycle, but also higher lows and higher highs. To reiterate, these three growth levers are number one, the globalization and full line product rollout of our FRONT brand where we now expect North And South America FENT revenues to reach $1,700,000,000 by 2029.

Number two, growing our precision ag sales to $2,000,000,000 globally by 2029 and number three, focusing on accelerating our global parts business and increasing the market share of genuine AECO parts to achieve approximately $2,300,000,000 in global sales by 2029. We rolled these new targets at our recent analyst meeting in December and we appreciate those who are in attendance. Moving to Slide seven, you'll see a recap of Precision Planting's twenty twenty five Winter Conference. That's one of my favorite events every year, just never miss it. This premier event attracted over 4,000 farmer attendees from across [indiscernible] The objective is to help farmers learn strategies and technologies that will help them efficiently and productively improve their operations. And they can all be implemented immediately on their farms. The conference also gives them opportunities to connect with other farmers and experts to share knowledge. One of the highlights from the event included an update on our Symphony Vision Target Spray System. Which will begin deliveries in quarter one of twenty twenty five. As you'd expect from us and our Farmer First strategy, this technology can be retrofitted on all sprayers sold in North America in the last ten years.

We are going to the market with two tier of offerings, The first is Symphony Vision Rate, which allows farmers to leverage pulse width modulation technology with live vision variable rate control The second is Symphony Vision Spot, which adds spot spray control of each nozzle. Farmers can grow into the technology at a pace they prefer.

Simply by adding additional cameras for the full spot spray feature set. Farmers will own the technology with no per acre recurring charge.

Enabling them to control weeds in a cost effective manner year after year while maximizing tax incentives in the year of purchase. Our unique independent distribution network emphasized retrofit first through a hands on approach where the dealers are seen as trusted advisors by the farmers The depth of the precision planting portfolio coupled with the PTX Trimbles product lineup allows Adco to offer absolutely the most comprehensive suite of technology, hardware, and services regardless of the make, or year of equipment a farmer owns. ATCO's objective is to be the technology hub of the mix fleet. This event is a testament to our unwavering commitment to innovation and shaping the future of the industry alongside our farmer partners.

I couldn't be more excited about what's ahead.

On Slide eight, you'll see a familiar slide that highlights how our precision ag products can help farmers reduce every expense except land. We can positively impact over 70% of the costs on a given farm. The value add and return on investment is clear for farmers. We're seeing increased adoption of technologies even in this challenged ag economy. Let's take electric drive planter rows and smart sprayer nozzles leaving our factories as examples. In quarter four, we had electric drive plantarose approaching 90% take rate Smart Nozzle saw over a 50% take rate in quarter four, and we expect that to grow significantly with precision planting Symphony nozzle. Twenty twenty four's marked a significant milestone for Agro's precision ag business. We brought together two powerful brands, Precision Planting, known for its innovation and farmer focus and PTX Trimble These two working in a fully integrated way as one powerful team to deliver market leading precision ag technology focused on the mix fleet. Through this integration, have already made several changes to better position the business for success including recent leadership changes, to enhance the focus on driving innovation and winning across all brands and farmers. These improvements accelerate our ability to deliver on being the most farmer focused precision ag technology company in the industry.

We also made progress on transforming our technology stack. With the PTX Trimble joint venture. We recently launched our OutRun retrofit autonomy kit and there's lots of excitement about it.

While the long term opportunity is attractive, there are some near term dynamics impacting the business. As we indicated at our analyst meeting, sales and margin for PTX Trimble have been pressured given the rapid decline in the broader industry and the ongoing distribution transition, Related to the softness, we have taken a goodwill impairment charge in quarter four which Damon will cover in more detail shortly. Despite this, we know this was absolutely the correct strategic move and we'll continue integrating innovating and growing the PTX portfolio of products and services hit our 2029 sales target, of $2,000,000,000 The short term market environment has no effect on the strategic value of this asset and our confidence in achieving our $2,000,000,000 sales target. Helping PTX accelerate development, and deploying industry leading solutions for farmers around the world will be one of my top priorities in 2025. I'll now hand it over to Damon to walk you through some of the financials from the quarter. Thank you, Eric. Good morning, everyone. Slide nine provides an overview of Regional net sales performance for the fourth quarter and full year. Net sales were down approximately 24% in the fourth quarter compared to the fourth quarter of twenty twenty three when excluding negative effect of currency translation and positive impact of acquisitions.

Pricing in the quarter was roughly negative 1% compared to the fourth quarter of Tyrechen the Europe Middle East segment reported sales down roughly 17% in the quarter compared to the same period in 2023 excluding the impact of unfavorable currency translation and favorable impact of acquisitions. Sales were down in most countries with declines in Germany, The United Kingdom and France showing the largest reductions. The products showing the most significant declines were high horsepower tractors, A tools and combines. However, parts showed modest growth even in this environment. South American net sales decreased and favorable impact of acquisitions. The market continues to be challenged and we continue to under produce relative to retail demand. High horsepower tractors, combines and planters showed the largest reductions By geography, the Brazilian market was down the most. Partially offset by increased sales in Argentina. Net sales in North American region decreased approximately 39% excluding the impact of unfavorable currency translation and favorable impact of acquisitions. Lower farm income continues to pressures farmer purchasing behavior. High horsepower tractors hay tools and sprayers saw the largest declines. Net sales in Asia Pacific Africa decreased 28%, excluding favorable currency translation and favorable due to weaker end market demand and lower production volumes.

The most significant declines occurred in China and Australia, Finally, consolidated replacement parts were approximately $418,000,000 For the fourth quarter, up 4% on a reported basis, and up approximately 6% year over year when a special thanks to the parts team around the world who delivered such strong results in 2024. Turning to Slide 10. The fourth quarter adjusted operating margin was 9.9%, a decline of 80 basis points compared to the strong fourth quarter of twenty twenty three. The weak industry conditions are a result and higher discounts. Region, the Europe Middle East segment income from operations decreased by $95,000,000 and operating margins decreased 180 basis points from Q4 of twenty twenty three to Q4 of twenty twenty four.

The lower margins were a result of reduced sales volume, factory under absorption from reduced production and increased discounts. Although the industry was down in this segment and the results I would note that our team in Europe did a fantastic job growing share and driving cost savings, which helped deliver the second highest level of earnings from the segment ever. So congratulations to the European team and their strong exit North American income from operations and operating margins decreased approximately eight thirty basis points. Lower sales from the weak market conditions the divestiture of grain and protein lower production hours and higher expenses associated with the integration of the PTX Trimble business are the primary drivers for the lower operating margins. Operating income in South America increased by approximately $15,000,000 in Q4 of twenty twenty four versus Q4 of twenty twenty three. And operating margins were roughly 11% in the quarter, Market conditions in the region have continued to remain weak. And we have reacted with significant production cuts for five consecutive quarters. SG and A expenses were significantly lower in Q4 twenty twenty four compared to Q4 of twenty twenty three due to the restructuring efforts.

We also had a one time benefit in Q4 of twenty twenty four of roughly sponsored by the Brazilian government which helped operating margins by around 140 basis points in the quarter. Income from operations in our Asia Pacific, Africa segment decreased by approximately $14,000,000 due to higher discounts As Eric mentioned, we did record an impairment charge of just over $350,000,000 in the fourth quarter related to the North American component of our PTX Trimble joint venture. In the quarter, we performed our annual goodwill impairment assessment concluded that the projected discounted cash flows would not support the current level of goodwill.

The industry conditions in 2024 and current industry outlook for 2025 negatively affecting the JV's sales and earnings during these early years were the primary reasons for the write down.

Despite this adjustment, I would reiterate what Eric said that the PTX Trimble joint venture is foundational to our autonomy ambitions off board software suite and guidance solutions for not just AGCO machines, but for the mixed fleet. We've made great progress in integrating the PTX Trimble joint venture over the past ten months and look to build on that momentum in 2025 and beyond.

We remain committed to our $2,000,000,000 precision ag sales target for 2029. Slide 11 shows our full free year cash flow for 2023 and 2024. As a reminder, free cash flow represents cash used in or provided by operating activities less purchases of property, plant and equipment. Free cash flow conversion is defined as free cash flow divided by adjusted net income. We generated $297,000,000 in free cash flow in 2024. Approximately $288,000,000 less than 2023 and lower than our expectations. The decline relative to our forecast in quarter [indiscernible] sales in the fourth quarter.

The decline year over year resulted primarily from lower net income. Our capital allocation plan includes reinvesting back into the business, repaying debt to maintain our investment grade credit ratings and rewarding shareholders with direct returns. In addition to the regular quarterly dividend of $0.29 per share, as a reminder, we also paid a special variable dividend of $2.5 per share in the second quarter of twenty twenty four. AADCO has paid over $1,200,000,000 in special variable dividends over the last four years. We will remain focused on deploying capital in the most effective ways for the benefit of our shareholders. Slide 12 highlights our 2025 market forecast for our three major regions. Which have not changed from what we communicated during our December Analyst Meeting. For North America, we expect demand to be meaningfully lower in 2025 Despite the recent rally in corn prices, both soybean and wheat prices remain below the long term average. Farmers are delaying equipment purchases due to higher interest rates and tighter profit margins we expect the Large XBEC segment to be down around 25% versus 2024.

The small tractor segment is expected to be down between 0% to negative 5% after several years of significant decline. For Western Europe, expect the industry to be down somewhere in the range of 0% to 5%. Yields for grain and oilseeds remain below historical averages due to droughts in some areas and excess of rain in others. Input costs for things like fertilizer and pest management remain high further straining profitability. For Brazil, after the significant decline we saw in 2024, we expect industry demand relatively flat in 2025. Farmer optimism around weather and positive progression of planting for soybeans and corn is expected to support retail demand for tractors Brazil is also seeing easing interest rates and stabilizing inflation, which will help contribute to similar demand levels Slide 13 shows the primary assumptions used to create our 2025 outlook which excludes the grain and protein business that we sold on November 1, 2024. We anticipate the 2025 global industry demand Our sales plan include market share gains, and pricing in the 0% to 1% range while foreign currency is projected to be around a 3% headwind.

With the announcement earlier this week, given the ongoing uncertainty on the impacts to U. S. Farmers, retaliatory tariffs and the effect on other parts of the world our outlook does not reflect any financial effects from tariffs. As things become clearer, we will update our outlook accordingly. Given the diverse global manufacturing footprint, the announced tariffs related to China, Mexico and Canada would likely have a minor direct effect on our financial outlooks.

However, retaliatory tariffs or U. S. Tariffs on the EU would influence our current financial outlook. Given this dynamic environment, we will remain nimble to address the situation and we'll update our outlook as things evolve. Engineering expenses are expected to be approximately flat compared to 2024. With the continued need to destock dealer inventory channel, our production hours will be down between 15% to 20% in 2025 as Eric mentioned earlier.

These production cuts will be primarily focused in the first half with the first quarter being down approximately 3540% year over year. With the lower level of sales and production in 2025, we expect our adjusted operating margins to be somewhere between seven percent and seven point five With the structural changes we made to our business, coupled with the cost initiatives we have implemented, we continue to view this outlook as achievable. Lastly, our effective tax rate is anticipated to be between 3538% for 2025, higher than 2024. The reasons for the higher rate are due to lower income and lower tax jurisdiction primarily in The U. S. And our Swiss legal entity.

Turning to Slide 14 for our 2025 outlook which remains the same as outlined at our December Analyst Meeting.

Our full year net sales outlook is 9,600,000,000.0 which reflects the market environment the elimination of the grain and protein sales and roughly a $300,000,000 headwind related to FX. The lost earnings from grain and protein, the adverse FX rates and the higher tax rate altogether reflect over $1 of non operational adverse impact When you layer on the further industry declines, expect our earnings per share to be in the range of $4 to 4.5 Given the weak market environment, we are modestly reducing our capital spending to approximately $375,000,000 versus the $393,000,000 in 2024 which keeps ADCO well positioned for any future demand inflections. Our free cash flow conversion target remains at 75% to 100% of adjusted net income as we look to further reduce working capital in 2025. Lastly, our Q1 twenty twenty five net sales are expected to be approximately $2,000,000,000 down approximately 32% from Q1 of twenty twenty four. If you were to exclude the grain of protein sales from Q1 of twenty twenty four, our sales will be down roughly 26% on a like for like basis. Given the lower sales volumes, and significant reduction in production hours, we anticipate Q1 earnings per share to be approximately breakeven and our low point for 2025.

We remain confident in executing our strategy and delivering a more resilient business through the cycle. Our adjusted operating margin outlook for 2025 would be over 300 basis points higher than the last time our industry is at 85% of mid cycle in 2016. This will be just another example of how we've structurally changed the business for the long With that, turn the call over to the operator to begin the Q and A. Yes. Thank you. And the first question comes from Stephen Volkmann with Jefferies. Hi, good morning guys. Thank you. Damon, I'm just going to start off with your Q1 commentary. I guess the implication there would be North America probably has a negative margin in the first quarter, but I don't want to put words in your mouth. Can you just give us a sense of how you're thinking about the profitability by region in the first quarter?

Yes, Steve, I think you're right. With the level of underproduction that we're expecting to see in the first quarter, North America would likely be in a negative margin. Europe, we would still expect it to sort of be in that low double digit range And then sort of South America, probably a little bit negative as well. Given the large underproduction there. And then your Asia Pacific sort of let low single digit margin range But again, I think the key for us is the level of underproduction here. This in the first quarter is going to be heavily weighted in North America and some America as we look to further drive down the dealer inventories in those regions.

Okay, understood. And then as a follow-up, I'm trying to get a sense if you could remind me of your total North American sales, how much of that is basically sourced in Europe?

Yes. So I think if we look at North American sales last year, Steve, in total about 35% of that came in from overseas. 25% of the 35% came from the EU.

Great. Okay. That's helpful. Good. I'll pass it on.

Thanks. Thank you. And the next question comes from Tami Zakaria with JPMorgan.

Hi, good morning. So much. My question is on the EME margin. It was quite impressive on a 17% sales decline. And you're seeing low double digit operating margin in the first quarter So given the cost savings there, how should we think about the mid cycle margin for that region when volumes do inflect in the future? Yes. I think, Tammy, Europe has done quite well with its spent, the market share growth the team has done there, done quite well. Parts has been relatively strong. Generally speaking, we would see eMe in most of our regions sort of in that mid teens mid teens margin at around mid cycle.

Got it. Okay. That's all I had. Thank you so much.

Thank you. And the next question comes from Mig Dobre with Baird. Yes.

Thank you. Good morning.

Given the way you frame Q1 for us, I'm sort of curious, as to how you think about dealer inventory progression Do you think this issue of this problem largely gets solved in Q1 or is this more of a more of a Q2 factor? What are some of the benchmarks that you're watching and determining production for Q2? Yes. I think, Mig, so if we go down by if we look at the regions as for Europe, we're in good shape. We don't anticipate really any significant [indiscernible] we're working to cut production significantly there. I would say we're probably looking into the second quarter as we adjust production given some of the seasonality of the business there as well as Q1 is generally speaking a fairly low selling season. So Q2 is where we'll see more sell out North America, I think, is the wildcard as we look at we're sitting here with around nine months of inventory. Despite the lower number of units because of the negative outlook. So you're sort of looking at two variables there. How does the industry evolve over, let's say, the next six months? So if we start to see farmer sentiment improve, grain prices, if you look at corn futures now, I think they're slightly over $5 for May's So a couple positive data points.

If that improves sentiment and we start to see the demand pickup, that would be an ability for us to maybe slow down. But I think in the near term here, it's going to be looking at the days on hand for the dealers, the units to have on hand, and taking an aggressive approach to the inventory. So I think that's the one I would say Q2, maybe a little bit longer depending on how that second half farmer sentiment looks here in North America. Okay. And if I may, one quick follow-up on pricing. Negative in Q4, but you expect it to get better, slightly positive in in 2025.

What gives you that confidence? And again, any commentary by region would be helpful as well. Thanks. Yes. Sure, Mig. So again, we're still with the zero to one positive We have some couple of things here. We have some carryover pricing in Europe heard me talk about the new Fence 700. We have Gen six and the Gen seven out there. So we have that year over year still affecting the European margins. We're likely going to be slightly negative in South America, not driven by I would say, pricing or discounts, driven more by a tax law change in Argentina where the industry was pricing for this 17.5% tax in Argentina that stopped in December We and I believe the industry as a whole have reduced that. So that comes shows up as negative pricing for us, but it's really more of a pass through for some taxes there. We expect to be positive for the quarter and for the full year. So it's still looking similar to what we said in December, a little bit more geographic if we waited with our exposure to Europe. Being slightly negative driving us down to that 0% to 1% for the full year.

You very much.

Thank you. The next question comes from Chris Sohn with Oppenheimer.

Hey, Hi, good morning. Thank you for taking the question. I wanted to follow-up on Tammy's question about the margin recovery in Europe, particularly in the fourth quarter and how we think about that flowing through to 2025.

Just specifically, can you give us an update on the reorganization of BayWa, how anything else that you might call out that's helping to contribute to that recovery?

Yes. Sure, Kristen. So bylaws on, as they've stated publicly as part of their restructuring efforts, have made a lot of progress. I think the reports from the third parties show that the business is improving. We continue to have a great partnership with them. We're working very closely with them. Their AGCO business has been extremely strong and obviously that's helped the Fence business So we continue to be very close with them. Obviously, as a restructuring initiative, they're not eager to take on a lot of the stock units. And that's been part of our challenge here with Fence and Byla is we're doing great pass through to the retail to the farmers, but the stock units as they start to book to preserve cash, I think we won't see that recover at least here in the first part of twenty twenty. Five. But overall, the market looks good there. I think what you should expect to see for us in EMEA again, as you know, macro wise, the most stable market we still see it down. But the cost actions we've talked about a lot of those cost actions as we work through conversations with workers' councils If you look at the restructuring efforts, we accrued quite a bit in the fourth quarter.

As we've gained some clarity and confidence on that we would expect that start to really drop to the bottom line more in the back half of the year as we start to execute on some of those actions here in Europe.

Great. Thank you. And then my follow-up is related to the free cash flow outlook for 2025. I mean, you mentioned some of the inventory that you want to wind down in the first half of the year. But against the comments that this may be the trough in 2025, how do you think about the working capital in the back half of the year, if there's some anticipation that we could see maybe a little bit of volume or Yes. So again, if I think about our free cash flow, we still feel fairly confident. Again, if I looked at where we delivered just in this 2024, we fell short of our expectations. But I think it's important to remember because of how we work with AGCO Finance, Eric and I both alluded to that we missed our sales by around $300,000,000 versus our expectations Had we made those sales that would have come out of inventory would have dropped right into cash for us. So that would have put our conversion rate at just around %. So we still feel good as we look forward into 2025. Knowing that there are some finished goods that we have to work through the system here because what we're carrying is more than what we want in the current environment.

So even if the industry picks up, it won't be sort of a one for one build as the industries are covering because of where we finished the year here falling a little bit short of the of the sales target. Thank you so much.

Thank you. And the next question comes from Jamie Cook with Truist.

Hi, good morning. I guess two questions Damon, first, similar question on South America given we start off the year negative and just the volatility in the margins, how are you thinking about margins for the full year? Sort of the cadence? And then I guess my second question, Obviously, you guys announced some restructuring actions that you started, I think, last summer. Given the weakness in the markets, anything more that we're contemplating And then last, finally, just what's the expectations on PTX in your guidance in terms of sales and profits, if any?

Thanks. Yes, sure, Jamie.

So South America, I think for the full year, we would sort of today expect those margins to be similar to where we finished the full year of 2024 sort of in that mid to sort of higher single digit range. As I mentioned on the prior one earlier questions, it will be negative in Q1. And then we start to pick up some profitability in Q2. Q3 is generally their strongest seasonal quarter there. So we'll see that be the richest or the best profitability and then tamper down a little bit in the fourth quarter again driven more by seasonality. But for the full year, I'd sort of put it close to where we finished last year. On the second part $125,000,000 of cost savings by the run rate by the end of this year. At the December Investor Day, I did announce that as we were looking at further efficiencies, better opportunities to leverage global centers of excellence. We added another $75,000,000 of run rate savings. Those will not happen likely until end of run rate of end of twenty twenty six as we start to migrate things to international locations leverage a little bit more technology So that being said, we're as Eric alluded to, we're watching this market very closely.

To the extent things get worse or worse than our plans, Obviously, there's always discretionary spend that we can control. We're doing the investments as we feel appropriate for the business for the long term. But at the end of the day, we've got to make sure we're delivering a certain level of margin and earnings as well. And so we do have some discretionary cost levers that we could layer on if necessary on top of the normal restructuring. As it relates to PTX as a whole, so again as a reminder for the team here, when we talk about PTX, that includes our precision planting business, our PTX Trimble business and our Fuse business. When we look at that as a whole, last year's revenues were just, I'll call it, around mid-8s. And I would expect that business to be relatively flat in 2025 at a similar type of sales level amongst those three groups combined.

Thank you. Thank you. And the next question comes from Jay Revich with Goldman Sachs.

Yes. Hi. Good morning, everyone. Eric, I'm wondering if can just expand the comments you made in the prepared remarks on the company's philosophy on upfront pricing versus subscription pricing within the context of one of your competitors? Doing aftermarket guidance kits with heavy aftermarket pricing. Can you just talk about what feedback you're hearing in the market and just your broader philosophy on upfront versus subscription effects [indiscernible] to be the most farmer focused company in the industry and what farmers continually tell us is that they have different appetites in different parts of the cycle. And when they want to purchase something, they'd like to finance it and get it all purchased in the good years. And then when the lean years come, they'd like to minimize their their ongoing costs. So there in general, not too favorable for subscription fees. Now there are exceptions to that rule and we have some a subscription model as as part of our outrun autonomy system. We've got some subscription aspects to our radical agronomic system. And so there are elements where it makes sense, especially for newer technologies and things like that. But as it relates to the the technology I mentioned, which was targeting spring, we feel that feedback we're getting is that they would rather pay for it one time and then be able to use it on a on a have their fixed costs done and not have an ongoing variable cost.

Because that way they can run over the field. So part of the problem is right now if you have a variable cost, if you run over the field a second time just to capture a few weed spots, it's actually very expensive from a variable cost standpoint and so they don't do that pass. We want them to be able to do that pass, which is one of the features that is attractive with that system. So that's how we think about it. Trying to be very farmer focused and use the subscriptions where it makes sense, especially on newer technologies.

Super. And then in terms of the South America performance in the quarter, pleasant surprise. Can you just talk about what the run rate you expect to be in 2Q, 3Q of that of that business? Appreciate the little bit of 150 basis points.

Benefit in the fourth quarter. But can you talk about once production cuts are done, what's the margin trajectory that you folks expect to be on this year?

Yes, I think Jerry, I mentioned on the maybe it's the last question, we expect to be given the heavy production cuts in the first quarter, we would be negative operating margin in South America. Slightly positive in Q2 as we start to hopefully improve the production levels a little bit there. Q3 we should lap the challenges and we start to see the industry improving. That's also the strongest one of the strongest selling quarters for them. So we should see profitability jump up in the third quarter and then tail back down a little bit more because of the timing of the sales here South American and for the full year, I would say similar to last last year's performance, maybe a little bit below just given the pricing in Argentina that I mentioned on one of the prior one of the prior questions, but sort of that mid to high single digits.

Thank you. And the next question comes from Caraventes Citigroup.

Thanks guys. Just wanted to ask a little bit about just anything that you guys or we should be thinking about with upcoming election in Germany and just any potential impacts either pre or post election?

No, I think what you've seen, there's two different factors. One is the country elections and then it's the EU Parliament. And we saw the EU Parliament move to the right And I think that's the one that is maybe more important for overall EU regulations relative to climate change policies and restrictions on farmers and things like that. I think it was a bit of a friendly move to farming practices, allowing them to continue to farm the way they want to be farming instead of adding more restrictions. As it relates to a country specific Maybe that's more leaning toward an impact on how well there will be cohesion between those countries and the U. S. Administration.

But regardless of who's elected, I don't see a big difference there. So we don't see much impact yet in our scenario planning on country specific collections.

Thanks. That's helpful. And then I just wanted to touch on the Trimble top line synergies you're thinking about in 2025. And I think if I recall correctly, I think you guys have talked about about four fifty or so premier precision planting dealers in North America, but only 50 or so selling Trimble. So just could you help us frame the opportunity there? And do you anticipate getting the 400s basically adding certain to sell Trimble and how many do you think could be added this year? Like how fast do you think that can happen? And what do you think is their overall willingness and ability to start carrying Trimble as well?

Yes.

There's been a lot of progress in the fourth quarter, especially on two fronts. One is signing up AGCO dealers to take on the the Trimble aftermarket technology and then also to establish the understanding in the market about where we're going with what we call full line tech dealers. And these are dealers that previously could have been a Precision Planting dealer or could have been a Trimble dealer.

And we want them to carry both portfolios going forward so that they've got the full breadth of all technology. If you add them all up today, we've got over 1,000 dealers in the marketplace and over 95% of the acres covered with dealers that cover our technology, PTX technology. Now what we don't have fully [indiscernible] 2025 as well as continuing to build out our Ag AGCO dealer portfolio. A little over 100 dealers in the ATCO lineup signed up today. We'll be between 203 by the end of this year, which is where we want to be. We've got the CNH dealer sign ups about where we want it to be. So our main focus is cross selling of the full line tech dealers and filling out the rest of our AECO dealer. We think both of those will make big progress in 2025.

Got it. That's helpful. Thank you. You bet.

Thank you.

Next question comes from John Hopkins Stilwell with Morgan Stanley.

Good morning. Thanks for taking my question. I just wanted to go back on the PTX. I think is a discussion around the sales maybe expectation this year, but just if you could kind of overlay the expectations on operating income for 2025.

Maybe just to expand on the impairment charge, it sounds like some of the adoption rates on penetration or position ag that you're seeing is is still good. So just to what extent are you seeing any kind of deterioration around that? Relative to PTX in particular?

Yes. I'll talk about the strategy elements and then I'll have Damon talked about the margin projection. If you took a look at all the activities we wanted to do in 2024 and that we're aiming for in 2025, we got them done or more so.

We launched the PTX brand, it's well understood in the marketplace and everybody understands that's the collection of all of these assets that we've gotten is now the strongest mixed fleet precision ag business in the world. We retained our key talent within the business. We retained all our OEM partners in the business. We've built up a strong channel. I just talked about it. We've got over 1,000 dealers and over 95 the acreage cover We got to fill that in and make it penetrate better, but we've got a great foundation. We're building the innovation factor where we launched OutRun technology on the automation kit. The data platform team is running at full speed one of the outputs that we won out of this deal. And we'll have our first launch coming soon. And we converted the technology guidance systems on our AGCO machine that used to be about a 20% take rate of Trimble It's up over 70% now and we think it will be over 85% in 2025. The activities we're aiming for are done. It's just that the market was so depressed that the market demand was down in addition to the last time buy for CNH.

Continued to run longer than we had expected because it last longer in a weaker market. We also implemented significant cost synergies in 2024 and we're going to continue that in 2025. We haven't gotten revenue synergies just because there's not much revenue in this market. But we still are aiming for that and we still are committed to delivering it as the market recovers. So with that, I'll have Damon maybe give a little more color on margin expectations. Yes.

I think, Angel, for PTX Trimble, we do expect the margins to improve improve in 2025 versus 2024 as you've heard us talk about the the integration, the CNH last time by, it's definitely was a challenging year in 2024, but as we start to see some of that work through the system here, we do see sales up in that part of in that business next year.

And we see the margin improving year over year. As it relates to the impairments, as I said in my comments, we follow a traditional discounted cash flow analysis that's heavily weighted on the near term as you would expect. And just given the industry drop in 2024 and the industry projections for 2025, it put a lot of pressure on the sales and earnings that we had expected relative to the deal that the deal model that we had built when we formulated the goodwill.

And as a result of that, we had to take the charge here at the end of the April. But as Eric said and I said, it doesn't change the long term plan, doesn't change the technology adoption rates, the excitement we're seeing from farmers and from our dealers. It's more of just that DCF and the timing of what we had to recognize when the cycle hit this year or last year versus it hitting two or three years from now.

That's very helpful. And then maybe I just wanted to go back to the comment I think on free cash flow. The confidence to be able to kind of reach that 75% to 100% conversion. You just unpack that a little bit more? I think again you made some comments around that.

Earlier, but just want to understand given the kind of 50% conversion in the last couple of years and I think we've heard from other peers maybe timing around [indiscernible] cash payouts, just anything that might be impacting or might be a risk just how you think about that confidence on that $75,000,000 to 100 Yes. Again, today, we feel again, we would have delivered the sales that we were expecting in the fourth quarter, we would have been around 100% conversion in 2024. Falling short on those sales affected the conversion this last year left me or left us with excess inventory at the end of the 2024. So when I think about 2025, we would expect to normalize that finished goods inventory sitting in AGCO's balance sheet getting that into the channel to the dealers and ultimately to the farmers, And so we still feel good about the conversion rate. I think the one question mark we would have is if the industry starts to recover in one of the other animal asked that question, if we start to see a rapid acceleration of the industry moving into 2026, how much will we have to start building in anticipation.

So would we be adding incremental inventory into the system in anticipation of a strong 2026? I would tell you that's a good problem to have if we feel that the industry is recovering. Right now based on our outlook, we don't see that level of extreme outlook for '26, but I think that would be the one thing we'll watch as we move through the year is that farmer sentiment and how do we plan the production schedule for the back half of the year.

Very helpful. Thank you. Thank you.

And the next question comes from Mike Finnegar with of America, Hey, guys. Thank you for squeezing me in. Can you just help us understand what with North America, I know you touched on this earlier with if there are tariffs with Europe, does it change any of your thought process or strategy when you think of Massey and FEM?

Any big shifts there that allow you to be kind of flexible or how to think about that with with North America if we do start seeing more of this tariff conversation pick back up, Yes. Our supply chain team has looked at several different scenarios of what we might do I think a lot of this depends on what are the rules of the game going forward, what constitutes a tariff, how long do we think it will be in place.

Any kind of major footprint change usually takes a multiyear payback.

And so so until we get some clarity on stability and what are the exact rules and details, we don't expect to be making supply chain shifts But we've got plans on the shelf ready to go if some of those materialize. But right now, we don't have anything in action mode And I think, Mike, just to add on to give a little bit more color, team has got an array of scenarios. Again, as I mentioned, the Canadian U. S. Canadian tariffs would be an would have some effect on us. And so do we shift the landing of some certain products into Canada versus The U. S. We're looking at things, do we do some minor kitting here in The U. S. Without large scale investments that may help us ease the short term pain. So as Eric said, there are an array of scenarios being running run this company, but we want to make sure we have some clarity before we actually execute any of those things. Fair enough. And just lastly, guys, I realized production cuts are really helping trying to make that progress on the inventory side.

Mentioned North America, I think, was nine months versus a target of six.

I'm curious how we think about the use side, if you're seeing progress there. And how you kind of help facilitate on the use side as I know you guys are making progress on the new side with the inventory? [indiscernible] We don't have as much of a use problem as some of our competitors do. We continue to use pool funds and things like that and other financing tools. Right now, used equipment values are holding up and used equipment volumes are similar now to back to pre COVID levels, but not at a concerning level for us yet. So we're managing using the regular tools in partnership with ECHO Finance.

Thank you. And this concludes our I would like to turn the conference back over to Eric Anzocio for any closing comments.

Yes.

I'd just like to say thank you for joining us today and the great questions on the call. ATCO has gone through a substantial transformation over these past years, particularly in 2024. It was a big year of change. Where we supercharged our precision ag portfolio with the PTX brand. Our team was instrumental in delivering the 8.9% adjusted operating margin result for 2024. That's a high watermark for us at this stage of the cycle and 300 basis points better than the last cycle as Damon talked about. I want to thank each of them for their contributions. It was a big year of lots of hard work all focused on the farmer. To all of our shareholders, we appreciate your support and looking forward to building value through our transformation program and executing on our Farmer First strategy.

Have a great day and thanks for your participation.

Thanks for joining the ATCO fourth quarter twenty twenty four earnings call. Conference call is now concluded.

Have a nice day.