MP Materials Corp. Price & Performance (MP)

Any reference in our discussion to EBITDA means adjusted EBITDA, and tons means metric tons. Finally, the earnings release and slide presentation are available on our website. With that, I'll turn the call over to Jim. Jim? Thanks, Martin. Hello, everyone. Let's get started on Slide four. MP had a terrific year of execution in 2024, a across our Materials and Magnetics divisions. We set a new record by producing 45,455 metric tons of REO during the year, 9% higher than in 2023. Want to remind you that production progress is rarely linear We are continuously implementing new equipment and processes as we advance Upstream 60 ks. This should lead to further improvements over the next year but along the way, there may be occasional instability and downtime, as we implement these enhancements. That said, we are extremely pleased to maintain strong concentrate product profitability as we expand production and optimize the upstream business. Moving on to midstream operations. [indiscernible] twelve ninety four metric tons of NDPR oxide in 2024, well above last year's total of 200 tons. In Q1, we are targeting over 20% sequential growth in production. Similar to our upstream business, we expect to make a lot of progress in the coming quarters.

This means rapid but methodical growth in production while we also make process improvements and capture efficiencies. We remain confident that we will reach gross margin profitability in our midstream operations in the very near term. As we scale, we continue to see growing ex China demand for our separated products. In 2024, we signed new agreements with the Department of Defense for both NDPR and Lanthanum. We also added a top five global automaker for a substantial direct volume commitment of NDPR. This means we now supply three of the five largest non China automakers in the world. Moving on to our Magnetics division, We achieved two critical milestones in the fourth quarter.

First, we started producing NDPR metal at Independence. The first time rare earth metal has been commercially produced in The United States in at least a generation. This achievement resulted in a second $50,000,000 customer prepayment in late December, bringing our total prepayments to $100,000,000 for the year. We expect to attain an additional $50,000,000 prepayment in the next few months, along with additional tax credits which Ryan will cover in a moment. Second significant milestone we achieved was initiating trial production of automotive grade magnets in the new product introduction facility at Independence.

This factory within a factory enables us to rapidly manufacture and validate magnets on the same, albeit smaller, equipment we will use to manufacture at scale beginning in late twenty twenty five. This represents a major step towards scaling production for GM by year end.

Moreover, MP now makes magnets at Independence that meet the rigorous performance necessary for EV drive motor applications. Which are essentially the most demanding specs by far.

Therefore, successfully producing high quality magnets for that kind of application demonstrates that MP possesses the intellectual, execution, and production capabilities to be a solution provider for a wide range of critical applications. As the world races to secure the building blocks of physical AI, such as robots, [indiscernible] or even eVTOL. United States Of America now has a champion, an MP, that can provide a domestic supply chain solution for rare earth magnets.

Lastly, during the year, we continued to judiciously manage our balance sheet. Pushing out the vast majority of our debt maturities to 02/1930 while retiring a little over 90% of our 2026 notes at a discount. These transactions allowed us to buy back 8.6% of our With that, let me now turn it over to Ryan to go through our financials and KPIs. [indiscernible] Thanks, Jim, and good afternoon, everyone.

Before diving into the details, I wanted to note that with the company making modest deliveries of magnet precursor products in Q1, we are providing additional segment level financial disclosures with this earnings release and our 10 ks filing expected next week.

Our two reportable segments are materials and magnetics. The Material segment consists of our upstream and midstream businesses at Mountain Pass, and includes our concentrate and separated rare earth product sales.

Magnetic segment encompasses our operations at Independence. And initially consists of magnetic precursor product sales, With the commercial start of Magna production on track for year end, we will add revenue derived from those sales in 2026. Additionally, we report corporate expenses and other costs, as a reconciling item to our consolidated adjusted EBITDA. These costs primarily consist of unallocated overhead legal and HR expenses and the other usual corporate support functions. Including executive compensation.

While not a reportable segment under GAAP, this category is the bridge between our segment adjusted EBITDA totals our consolidated adjusted EBITDA. Lastly, I would point out that in 2024, 100% of our revenues and cost of sales were generated in the Material segment. Magnetics costs are primarily located in the SG and A and advanced projects portions of our consolidated P and L ahead of deliveries of saleable product in 2025. So let's start on Page six with our full year consolidated financial results. The revenue trend over the last three years has been driven mainly by NDPR pricing. The average price of NDPR was about $120 per kilogram in 2022, dollars 75 per kilogram in 2023, and roughly 55 per kilogram last year. The decline in realized pricing falls straight to the bottom line in a commodity Also impacting our 2024 results was the ramp in production of separated products. Primarily NDPR oxide. As we have talked about throughout the last year, our production costs for separated products are temporarily elevated as we continue to optimize our processes and ramp production levels towards our targeted throughput. And as n e p r oxide production volumes ramp, we are consuming more REO from the upstream circuits to produce separated products, supplanting otherwise highly profitable Lastly, you can see the flow through of the decline in adjusted EBITDA to adjusted diluted EPS on the far right chart.

EPS was also impacted by higher depreciation from capital assets placed in into service in the Materials and Magnetic segments over the last two years, as well as higher interest expense from our new 02/1930 convertible notes partially offset by a larger tax benefit in 2024. Turning to Slide seven, this is our usual slide showing the KPIs for what is now our Material segment. With the metrics on the left reflecting our upstream performance and on the right relating to the midstream. As Jim mentioned, on the far left, you can see our record setting concentrate production of 45,455 metric tons in 2024. Which was our fourth consecutive year over 40,000 tons. Our performance in the back half of 2024 gives us confidence in continued modest production growth. 2025. The decline in REO sales volume shown on the left hand side of the page is driven by our ramp in the production of NBPR oxide shown on the right. Realized prices per metric ton of REO moved in tandem with NDPR pricing as you would expect. Our sales of NDPR eleven forty two metric tons in 2024, moved generally in line with NDPR production with a short lag which will ebb and flow based upon shipping schedules, and the mix of metal versus oxide sales.

On the far right, you can see our average price for NDPR sales for the year. On Slide eight, financial results for the Materials segment for the past three years are displayed on the left and the magnetic segment results are shown on the right. With our updated segment disclosures, investors can now get a better sense of Mountain Pass's favorable cost position in the industry as well as our significant investments in the Magnetic segment over the past few years. For materials, the revenue trends are in line with my prior comments on our consolidated Regarding Materials segment adjusted EBITDA, you can now see the earnings power of the Mountain Pass operation on a standalone basis. 2024 results reflect both our shift from selling concentrate to consuming it, which would have a temporary negative impact in any pricing environment. And the pronounced pullback and market pricing for our products. Additionally, the numbers account for the early production phases of NDPR, serum and lanthanum products. Operating below one third of our target throughput while incurring costs associated with labor, maintenance and infrastructure that is needed to run at full capacity. With our continued progress on ramping our midstream volumes as well as firmer pricing, we look forward to an improved 2025.

The Materials segment adjusted EBITDA loss of $14,100,000 was driven primarily by the items outlined in the consolidated discussion. These results also reflect a $21,500,000 write down of inventory during the year, partially offset by a $12,200,000 credit related to the Section 45 x tax credit for anti proxide production. You can also see on the right that the Magnetic segment adjusted EBITDA loss has grown as we continue to invest in staff ahead of initial production. Now have north of 100 employees in this segment. And we will likely double that number over the next two years as we ramp magnet production. As part of our segment results, we also now break out capital expenditures between materials and magnetics On the left, you can see that the capital expenditures in materials have dropped meaningfully over the last two years as we wrap up our midstream optimization and recommissioning efforts. And on the right, you can see the fairly steady spend on independence, beginning in April 2022 when we broke ground. In 2024, capital expenditures for the consolidated company totaled $186,400,000 decreasing over $75,000,000 year over year. I'll provide our 2025 CapEx expectations in just a moment. Moving to Slide 10, and our quarterly consolidated financial metrics.

Revenue climbed 48% year over year to $61,000,000 driven by the ramp in sales of separated rare earth products, primarily NDPR. And in the middle of the slide, you can also see that the ramp in initial subscale production of separated products continued to impact EBITDA added the continued growth in Magnetics. On the far right, similar to the full year, we have the flow through of the change in EBITDA impacting adjusted diluted EPS. As well as higher depreciation and interest expense on a year over year basis. Moving to Slide 11, On the left, REO production increased 24% year over year. Setting a record for a quarter with a planned maintenance outage. This also drove the 9% increase in REO sales volumes. Realized pricing strengthened slightly sequentially in line with our outlook but was down 16% compared to last year. And as we look at Q1, we expect sequential REO realized pricing to be roughly flat with Q4, assuming current market prices hold. On the right side of the slide, you can see that NDPR production was solid at 13 metric tons.

Sales volumes in the quarter were quite strong. And roughly in line with the prior quarter's production. And lastly, NDPR pricing improved sequentially in line with our expectations. As we look at Q1, similar to REO realized pricing, we expect sequential pricing for NDPR to be relatively flat with Q4 assuming current market prices hold, subject to the puts and takes of delivery timing and contract terms. Moving to Slide 12, I discussed the revenue trends on the consolidated slide And as I mentioned earlier, despite our production costs for separated products being temporarily elevated, We were able to offset that headwind as well as most of the segment's SG and A costs, with continued profitable sales of REO, as EBITDA for the quarter came in at negative $1,300,000 These results also reflect a $6,400,000 write down of inventory on the quarter, mostly related to Lanthanum. As well as an offsetting $8,400,000 Section 45 ex credit. In part due to the favorable final rulemaking by the IRS in October. Importantly, looking ahead to 2025, as we further ramp production, we continue to have clear line of sight to gross profit in sales of NDPR which as you can see from Q4's results, should return our Materials segment to profitability.

And on the right, you can see the modest investment in operating costs in our Magnetics segment. Again, importantly, will begin booking modest revenue in Q1 and expect to turn EBITDA positive in this segment in the first half of the year. As for CapEx, we expect to spend roughly $150,000,000 to $175,000,000 in 2025 net of government grants. Recall that much of this spend is the spillover from our 2024 capital plan, mainly due to timing. Had we not underspent in 2024, this outlook would have been closer to $100,000,000 This year's spend will be split roughly evenly between the Materials segment and the magnetic segment. Magnetics CapEx will be focused on completing the acquisition and installation of the latter portions of the manufacturing equipment to reach our goal of producing magnets by year end. And in the Materials segment, our spend will primarily be focused on high return growth investments, [indiscernible] certain initial work on the recommissioning of our chlor alkali facility, Heavy rare earth separations, along with debottlenecking projects and the usual infrastructure and maintenance CapEx. Turning to the balance sheet. As we continue to make solid progress at Independence, we reached an operational milestone that unlocked an additional $50,000,000 customer prepayment in the fourth quarter.

Bringing the total prepayments received to $100,000,000 for the year. We expect to receive the final $50,000,000 prepayment in the next few months. We also expect to receive an additional roughly $50,000,000 in proceeds from our 45x and 48c tax credits within the year. Further supporting our strong cash position. The fourth quarter results are always a bit more to take in. As we recap both our recent performance and reflect back on the full year. Given the pivotal moment we are at in our country, our economy, and our company. I want to recap what these financial results and KPIs really tell you about where MP sits today. With regards to the Materials segment, in 2024, we undertook a tremendously disruptive in our business from producing and selling a highly profitable concentrate product to consuming it to produce separated products. And as I mentioned earlier, we are currently operating at roughly one third of our targeted throughput for NDPR oxide production, resulting in temporarily higher cost per unit of production. Despite this transition, we have a line of sight to turning NDPR production and therefore the segment back to profitability. Even in pricing, which certainly on an inflation adjusted basis is a decade or longer lows.

These facts and our recent performance give us tremendous confidence that we will be a low cost producer of NDPR as we reach targeted throughput. While we continue to invest in debottlenecking and other high return projects, have completed the major optimization capital spend amount and pass, boosting our go forward cash generation profile for the segment. And in Magnetics, as we began sharing last month, what we have built at Independence is world class. Particularly with regards to the team we have assembled. In addition, the lion's share of our investment in the facility is complete. And we will begin generating revenue and EBITDA here in the first half of twenty twenty five. We still have roughly $100,000,000 of capital spend to go. With most planned for 2025, but the nature of our contract will allow us earn a strong fair return on this investment, while also recapturing the full investment over the coming years. This will not be like the commodity materials business. With initial losses as production ramps. Importantly, we believe independence can more than double our initial target capacity. With significantly lower incremental capital given the infrastructure, laboratories and NPI facility, do not have to be duplicated.

And operationally, as Jim mentioned, our early success in making automotive grade magnets some of the more challenging magnets to make, provides us a strong base from which to grow. As our opportunity set explodes with the advent of physical AI and other critical use cases. With that, let me turn the call over to Michael. [indiscernible] Thanks, Ryan.

I will now walk through the three parts of our operation. Upstream, Midstream and Downstream. Before I go through the details, I would like to acknowledge the hard work of our team for executing a record year at our three locations. We did so again without experiencing any lost time injuries and with a very strong regulatory and environmental performance. Thank you all for your commitment and unwavering determination in the face of countless challenges. Here are recent photos of two of our US made products. On the left, NDPR oxide produced in Mountain Pass on the right, NDPR metal produced at Independence.

We are very proud of our progress in reestablishing this U. S. Supply chain and we still have a lot left to accomplish. On to the operations. In our Upstream business, we continued to deliver strong results in REO production per operating hour The October scheduled outage was executed smoothly and with minimal rework. As I mentioned last quarter, we commissioned the first significant project in our Upstream 60 ks initiative an enhancement to our grinding circuit including new cyclones and screening equipment. Over time, we expect this investment to help us tighten our Grind distribution incrementally improve rare earth recovery. Initial operations were primarily focused on achieving mechanical stability and operability and I'm pleased that this has been largely achieved. In Q4, the new assets had a slight negative impact on uptime and results, though when operational, they showed strong promise. We are working with the vendor to identify materials of construction for the screens that will better withstand the abrasiveness of our ore and our other operating conditions. In addition, we see the need to upgrade certain flotation and tailings plant pumps and line sizes to deal with higher recycled water usage necessitated by lower pulp densities preferred by the screens.

We expect that Q1 will benefit from these new assets although there will be some ups and downs while we optimize the operation. In Q4, the combination of some altered flows from the new circuit strong production growth from previous initiatives, and normal ore variability at times put pressure on our concentrate dewatering and tailings processes. Resulting in slightly lower than normal uptime for an outage quarter. The midstream operations continues to ramp NDPR oxide production in a nonlinear fashion. But with continuous improvement. Similar to the upstream assets, the semiannual outage was executed on time and with less unplanned equipment maintenance than during prior outages, The midstream assets are a series of interconnected continuous operations with in line storage to smooth short term production interruptions in the various circuits. However, a significant part of our ramp involves aligning the uptime and throughput of each process to optimize resources.

As previously discussed, we have been focused on uptime and stability before maximizing throughput. In much of the operation, we are starting to see more satisfactory uptime and good process stability While we still have a few assets that are not meeting our expectations, we are steadily addressing these. We Some of the key circuits can now further increase uptime only if other areas increase their throughput. This is a pleasing development In Q4 and early January, we had a couple of mechanical and process upsets that held back production and or required unexpected rework of the product finishing steps. Consuming extra resources and limiting throughput Based upon what we have seen since, we are expecting stronger run rate production for the balance of Q1. We also expect that this momentum will improve further after our Q2 maintenance outage. We also believe that some of our maintenance costs labor hours, and reagent consumption per ton of production will be leveraged to a greater extent going forward. In short, I feel good about recent trends in production volumes and cost structure. We still have significant room for improvement in all areas. The Downstream Metal, Alloy and Magnetics business achieved MP Materials' biggest milestones in Q4, The highlight was commercializing continuous NDPR metal production at Independence.

While still early and at relatively limited scale, we are pleased with our team's progress on the learning curve and our ability to consistently produce on spec metal. Over time, we expect to improve yield and first pass on spec metal percentage and reduce energy and raw material consumption per unit produced. In addition to preparing metal for commercial scale alloy and magnet production later this year, we are now able to use our own metal for prototype strip cast melts Our new product introduction facility continues to increase its scope of activities and magnet characterization. From expanding prototype operations we are now able to produce magnets for customer qualification and also evaluate the impact of varying process conditions on magnet attributes experience that will help us accelerate the operation of full scale equipment as Moore is commissioned later this year and into next year, 2025 promises to be another year of tremendous progress [indiscernible] With that, I will turn it back to Jim. Thanks, Michael.

Turning to Slide 14, here's a picture of one of our automotive grade magnets. Produced on our NPI line at Independence. As our commentary and this picture highlight, 2024 was a terrific year of execution and 2025 is already off to a strong start. As most of you know, The rare earths industry has long been subject to extreme market distortions driven by China's command over global supply and its ability to dictate pricing through subsidies export controls and other non market mechanisms. However, That playing field is beginning to shift. According to Atomos Research, global demand for NDFEB magnets is expected to triple by 02/1940. Fueled by electrification and physical AI. Where intelligent automation meets real world applications in robotics, defense and industrial systems, This trajectory underscores the escalating financial commitment and risk tied to China's dominance over rare earths. Meanwhile, the Trump administration is poised to take decisive action to level the playing field for American workers. As President Trump recently stated, The U. S. Is now committed to true reciprocity in trade, whether through tariffs, subsidy adjustments or other mechanisms that level the playing field for American businesses. This shift combined with the long term supply and demand realities of rare earths, reinforces our conviction that MP Materials Will Play A Pivotal Role In Securing A Competitive And Resilient Supply Chain For Industries Of The Future.

Moreover, As The Era Of Physical AI Accelerates, National Security Considerations Will Only Grow In Importance. Perhaps Even More So In Rare Earth Magnetics, Than In Other Electrification Applications. Today's Battlefields From Ukraine to The Middle East already proved that warfare is no longer about dogfights between jets but about networks of drones sensors, and AI driven robotics. On Wall Street, and in capital markets today, we see immense enthusiasm for defense tech, robotics, and physical AI. But I want to remind everyone great power competition is not just about the next breakthrough in hardware or software. It is also about securing the critical supply chains that make those breakthroughs possible. Can the next hot drone robotics or eVTOL company really tell investors with a straight face that the rare earth magnets or other components come solely from China At MP, we remain relentlessly focused on scaling our fully integrated rare earth supply advancing our Magnetics business and delivering long term value to our shareholders. Momentum is building. The fundamentals are on our side. And MP is positioned to lead for years to come. With that, open it up for questions. Operator?

Thank you. Please click on the raise hand button, which can be found on the black bar at the bottom of your screen. When it is your turn, you will receive a message on your screen from the host allowing you to talk, and then you will hear your name called. Please accept, unmute your audio, and ask your question. We will wait one moment to allow the queue to form. Our first question comes from Matt Summerville with DA Davidson. Please unmute your line and ask Thanks.

Just curious, beyond [indiscernible] this is nonlinear in nature.

How should we think about the cadence in NDPR volume ramp [indiscernible] into 2026. And into, yes, calendar 2026 and how the current pricing environment informs the way you're going to ramp from here? And then I have a follow-up.

As I mentioned earlier, in terms of our production ramp, we've been focused on balancing cost efficiency, and the long term success of the business. In 2024, we were primarily focused on stability and uptime. And in 2025, that will focus more on uptime and throughput. And this underlines our plans for significant volume growth in 2025 along with the return to profitability. As you mentioned, In the first quarter, We'll show improvement, but we're feeling even more confident about that growth path after the early Q2 outage And then as a follow-up, I'm sure you guys saw this the other day, maybe it was even yesterday, that China plans to prohibit non state companies from mining rare earths effectively or theoretically further tighten their control I guess, what's your view on how that ultimately plays out in the commodity itself should that come to fruition?

Good question. Obviously, it's difficult for us to speculate on what will happen with Chinese regulatory environment But this does seem consistent with the policy announcements from last year. Along with a general trend over the last decade plus of consolidation of the of the market or of the Chinese market into the two supermajors and the emphasis on purely private owned market participants. This obviously means more of the quota allocation and enforcement is in the hands of those two players as well. Certainly, the initial response from the market seems to take this as maybe more supply discipline and higher pricing. Over the last couple of years at the prevailing prices, most of the Chinese market has also been unprofitable.

So perhaps this is a move towards addressing that Either way, we think it validates our business model and our mission. And the importance of having a diverse supply chain that's not dominated by a single party.

Thanks, Michael.

Our next question comes from Corinne Blanchard with Deutsche Bank. Please unmute your line and ask your question. Hey, guys. Can you hear me?

Yes. Yes. Hey, thank you. The first one, Michael, you mentioned that there is few areas that you would like to see improving at Mountain Pass. Most of us went there like a few weeks ago. And so could you just like talk about the few area that you would like that to get better and then what can be done? And And so and then the second is also related to Mountain Pass I think at the site visit, you mentioned trying to focus more and more on exploration for this year and next year. So if you could just share some more detail on that, that would be Okay. Thanks, Green. As I also mentioned in the remarks, the midstream assets are a series of interconnected circuits And while as part of our stage two optimization project, we added additional intra circuit storage, there is limits on how much we can smooth uptime between the different stages. So the different areas need to run each with sufficiently high uptime and throughput to achieve production [indiscernible] In general, we're very happy with the process itself. But there's still room to improve the mechanical reliability of certain parts of the assets.

One kind of category that we see significant room for improvement is in solids handling and conveyance where we see intermediate products not in some cases moving as reliably as we need them to. Some of these issues resolve themselves as The processes on either side of that material handling improves, but some require specific troubleshooting. And as we address one issue, it may expose another area. That didn't appear to be a bottleneck. So we're sort of addressing these as we go, hopefully as many at once as we can. [indiscernible] progress may not be as apparent in the production figures as we may like. We're really optimistic that behind the scenes here, we are making day to day progress and that will become a lot more apparent in the coming quarters.

Thank you. And if you can just, like, talk a little bit about the exploration plan that you may have for this year and next year?

Sure. Since 2010, there's really been minimal exploratory drilling of the Mountain Pass deposit We've done a small amount a couple of years ago. But I think as we've improved process recovery in In the concentrator We're looking to fill in gaps in the In the mine, where we do not necessarily have sufficient definition to include certain areas in the resource or not enough definition to to really categorize what the grade is and what the mineralogy is, So that will be the focus for this year. More within pit or near pit. Think in the coming years, we may look at expanding that that area within our primarily the 2,000 acres that we have of the mountain pass patented claims, Great. Thank you. Thank you.

Our next question comes from Greg Jones with BMO. Please unmute your line and ask your question.

Good afternoon.

With all the discussions of tariffs over the past few weeks or months, are there any aspects of MP's business that are sourced external to The U. S. Which could potentially be exposed to price increases?

Maybe things like consumables, chemicals or reagents.

Hey, Greg, it's Ryan. I'll take that. You know, certainly, every global business is concerned about tariffs. I think we've been very forward thinking here. And given the required logistics of the major input costs for Mountain Pass and its very favorable position we have very little exposure to imported material whether Chinese or otherwise. So we don't expect the increased tariffs for global imports into The United States to have a meaningful impact on our cost structure.

Great. Thanks. And one related question. Been some reports that the Trump administration may pause grant payments under the IRA Is there any potential risk that grants that MP expects to receive could be at risk?

No. Hey. Hey, Greg. This is Jim. I don't think so. I think There's one area that there's sort of [indiscernible] appreciation is in critical minerals. And so There's pretty broad support for that. In fact, on Valentine's Day, they just put out an executive order establishing the National Energy Dominance Council and one of the big things is focused on more critical minerals production. So our expectation is that anything that is done is going to be, extremely beneficial towards supporting our efforts. So we don't really see much risk on that front. In totality.

Great. Thank you.

Our next question comes from Carlos Alba with Morgan Stanley. Please unmute your line and ask your question.

Yes. Thank you very much. Good afternoon, everyone. So just you clearly have surprised people over the years on how you have executed [indiscernible] [indiscernible] what can you tell us? Is that your way of saying you didn't believe in us?

No. I'm saying the market. Okay, sir. If you have seen how we have talked and rated the stock. But anyway, [indiscernible] The Midstream as was said, is only a third of the production right now. So how do you see the progression of production and cost? Should we expect sort of a linear relationship between two, a constant relation between the two? Or do you think that you can deliver or you will deliver production at capacity or normalized run rate before then costs start to really come down. Just to make sure that we don't miss that as we try to model that the improvement.

Thanks Carlos. This is Michael. I'll start and Shirayen will add on. And very much as we saw with the the upstream business, We saw a period of challenging reliability with relatively low throughput followed by significant breakthroughs where we had sort of step change functions in production. I think seeing sort of similar trends here where the progress is not as apparent and then but we know it's happening, and we expect that to come through. We've been clear and focused on ensuring we're not pushing volume for volume sake at cost that don't that don't work. And so I'm hopeful that [indiscernible] As we get to certain levels of volume that the cost structure will improve materially, I'll let Ryan follow-up on that.

I mean, I think you hit it well Michael.

All I'd say is, obviously, with the data we see, in each circuit, when each individual processes running as intended. Which we get very good line of sight into that over the course of you know, a production quarter, the model is working as we expected. In fact, And so we're at this point where to Michael's point, stringing it all together to maintain [indiscernible] reliability with the increase in throughput is really going to be what we need to unlock the cost structure that we've always targeted. We feel very good that we will get there And so, you know, that's a lot of words to say. We're at the point where a lot of this is a fixed cost absorption issue where as we get throughput the way we should be getting throughput, so being thoughtful about it, we do expect our costs to come down. On top of that, I talked a little bit about some of the projects that we are investing in that I think give us even further excitement about our ability to continue to bring costs down and b, a low cost producer globally of of n dPRox and some other investments that we're working on.

And so this will be a long term plan to continue to pull costs out even as we just get to our targeted cost structure from throughput over time.

That makes sense. And maybe a related question, Budd, more on the upstream. As you start executing and delivering on the 60 ks project, That incremental throughput and production output of concentrate how much of a cost benefit, cost reduction benefit would that generate you think [indiscernible] This is Ryan. I'll start and Mike jump in if you've got other thoughts. I think as you've seen with our cadence of production cost improvements on the upstream side in pure Certainly, depending on how you get to those higher throughputs, will inform how much of a cost benefit will flow through the model. What we have seen [indiscernible] a lot of the production growth coming via improved recovery. Improved recovery has nearly a full drop through to the bottom line. And so those are the types of opportunities that we are focused on in the short and medium term. As we want and look to grow even further, there is a limit to the amount of improvement to recovery that we can achieve. And so that will have a slightly different cost profile But putting that all together, certainly there's a significant amount of fixed infrastructure and shared costs that will start to get leverage on as well as we drive production growth.

And so so different shades of a positive, but generally all quite positive.

Thank you very much. Our next question comes from Bill Peterson with JPMorgan.

Please unmute your line and ask your question.

Yes, sorry about that. Can you hear me okay now?

Yes. Hey, Bill.

Yes. Good afternoon, everyone. It was nice to visit both Nonpass as well as Independence. Thanks for all the insights you shared there. On the midstream cost downs, just want to come back to that to make sure I understand. I think the prior quarter you had thought you could achieve gross margin positive exiting the quarter, but now you're seeing I guess, you saw some throughput issues, some reliability issues. I guess with some of the improvements you have made since then, and the expected improvements yet to come, [indiscernible] is, I guess, no change in pricing, which frankly we haven't really seen much over the past quarter. Is your latest expectations on turning gross margin positive? [indiscernible] I don't think we've really changed our view at all on timing of exiting Q1 for hitting gross profit in the NDPR production We continue to think we're tracking towards that. Obviously, there are put to take Michael talked about the rework in January. But we still think that We have good line of sight to achieving that. So no change in our commentary on that.

Okay, great. Thanks for that confirmation. And also, I guess, in the third OEM, congrats on that. I guess, are you do you have the bandwidth or the capability to support additional OEM agreements at this stage? Is there interest from your side or interest from other OEMs? And I guess beyond the automakers, can you shed light on any discussions you're having with companies that are in the robotics space or eVTOL or some of these emerging markets that that you kind of alluded to earlier will frankly need to sort of Western source of supply?

Yes, sure, Bill. It's Ryan again. In terms of the automotive OEM, this was something we announced, I think, a couple of quarters ago. And the way we think about it is obviously serving those OEMs across a variety of products, both on the oxide metal and magnetic side. So from from the magnetics perspective, you know, we we we have no new news to break at the moment. And certainly, we remain magnetic side at the moment on executing for General Motors given the significant commitment we have to them in that facility. That said, both on the materials segment and the magnetic segment conversations have picked up I would say meaningfully, over the last three months or so. In terms of interest in securing supply from a trustworthy you know, Western supplier of of these critical products. And so whether it's the tariff discussion and potential reciprocity there, or just the concerns where we've seen in several other critical minerals an inability for certain, you know, large OEMs to source that is really the crux of our mission from the beginning. And so everything that we're seeing geopolitically I think, plays exactly into the reason we're doing everything that we're doing.

And so conversations continue across both sides of the business. Specifically to your question on robotics, eVTOL, etcetera, we are having a lot of conversations. I think the the great thing about the way we set that business up is focusing on a customer like General Motors and the automotive supply chain to begin with, lower SKU count, an extreme amount of focus on quality and, some of the hardest magnets to make. And so hitting that first sets us up for great opportunities to come that we can into independence where we've already got the team in place We've got most of the assets in place. And so I would say, you know, we're having a lot of conversations and obviously, you know, you know our MO, we will announce something when we have something to announce. But we have no shortage of of opportunities. [indiscernible] Good luck, team. Our next question comes from Ben Kallo from Baird.

Please unmute your line and ask your question.

Hey, guys. Thanks for taking my question. Thanks for all the detail.

Just could you just update us on your approach to heavies as it relates to both the upstream side of the business And then as far as sourcing for the magnetic side of the business, And then my second question maybe for Jim. Just on the policy front, you've mentioned the council that was formed, but is there anything that you could point to that there's actual teeth to any kind of pricing support or any kind of efforts on the policy front to kind of reward the domestic production? Thank you, guys.

Sure. Michael, why don't you go first and then I'll get the second [indiscernible] Certainly, we've been primarily focused on our heavy ore separation project [indiscernible] [indiscernible] Terbium and dysprosium to our magnetics business and Our main interest in the rare separation every rear separation is to support the Magnetics business. At the same time, we've been focused on the most efficient way to apply shareholder capital to that project. We feel very good about where we are in terms of securing enough material to support the startup and initial 1,000 ton capacity of the [indiscernible] [indiscernible] as a backup to that our own efforts, we do have the ability to source materials in the market. Our heavy earth project does allow for and is designed for the ability to process third party materials. And, you know, we have a team of people who've been focused on, you know, trying to source those those materials. Of course, as the market has evolved, some projects that we had hopes for either delayed or worse than delayed? But we're excited about what we're doing in the Heavies project. As you're able to see We're able to coordinate efforts between our our Midstream team at Mountain Pass and our Downstream team at Independence in order to develop a really thoughtful, integrated Heavy earth business that incorporates recycling and avoids unnecessary process steps and costs and hopefully and is certainly probably uniquely aligned in terms of desire to minimize heavy earth usage [indiscernible] the The amount of heavy hitters that are [indiscernible] And hey, Ben, on your second part, but just finishing what Michael said, one important thing We may have covered this before, but on the heavy side, the the really exciting growth use cases that we're now seeing in the marketplace around physical AI, a lot of those use cases have very limited or even no heavies.

So just I think that's a really important thing to think about as far as the growth prospects [indiscernible] But moving on to policy, you've you've heard me say this repeatedly, but I think it's worth repeating again and again and again. You know, we we want a level playing field, and then we'll do the rest. And that's the message that we've given [indiscernible] to the government repeatedly over time, which is we don't have a level playing field. Give us that level playing field, and we'll do the rest. And obviously, this new administration is focused on companies like ours that are bringing jobs back. You know, we have operators, electricians, maintenance workers, engineers, all all the things that the golden age of American manufacturing is supposed to be focused on. And so I would say actually one pronouncement that was really amazing think it was a week ago, it was within the past week, You can find a posting from President Trump on on Truth and X where he actually had a very long detailed paragraph about reciprocity, and he went into detail about how he considers reciprocity to be, and it, you know, went specifically into various aspects beyond just other countries' tariffs with respect to VAT and other subsidies and whatnot.

And so I think that there's I think if you take him at his word, and I certainly do, and I think we've seen just tremendous movement in this first month writ large, It's pretty astonishing and amazing that they're going to be true to the word to level the playing field And so think it's still unknown as to exactly how that's going to take shape. But But I think if we can get that It's going to be really extraordinary for our business.

Our next question comes from Laurence Alexander from Jefferies. Please unmute your line and ask Good afternoon. So first of all, have you now already produced and qualified all of the target SKUs that you need for the GM contract Or do you still need or are there still some technical hurdles left to hit on that front? And then secondly, just a question about trade offs You're in a different place than when you signed the first contract. So what counts as a comparable or better quality contract now I mean, you don't need the upfront payments so forth. So can you just give your philosophy around that? And then also can you give your I realize we've all been badgering you to get Magnetics to profitability. But once you cross the line, how important is it to build and expand the engineering talent to be able to generate more handle more SKUs and go after adjacent markets. Just what's your philosophy on the timeline for that?

Sure, Lawrence. It's Ryan. I'll start. In terms of your question on qualification, I think we are extremely pleased with the progress that we've made in producing the quality of magnets that we have in the NPI facility. I would say the qualification and PPAP process with an automotive customer is very long and involved and involves quite a bit of production runs on full scale equipment. And so that will come later in the year We have a great working relationship with the engineering and qualification team at our foundational customer and continue to have great dialogue there. So we remain excited about that. I don't know, Jim, if you want to cover your thoughts on contracting. Yes. I mean, Lawrence, you're asking specifically around what makes a good contract or not? Mean, I think we've been very methodical about how we're building this business. I think, hope hopefully, you see that now and [indiscernible] the answer is that there's so many puts and takes that it's hard to give it to you in one summary other than We're going to be thoughtful stewards of shareholder capital. We're not going to go on spec to take a bunch of risks And so as we add new cut well, first and foremost, we need to execute well.

And so our primary focus in the magnetics business at Independence is making sure we do an incredible job for GM at, you know, who's our foundational customer. And delivering beyond that growing the business, I think it's fair to say you can probably see from our commentary and our view about how the world is moving and the types of customers that would make incremental sense that over time, you'll you should expect to see something on the physical AI front It's still obviously very early in that, but it's just really extraordinary. The pace of capital formation that's happening there and frankly, the scientific breakthroughs that are really happening in those businesses. I think maybe certainly not you, Lawrence, but maybe some people thought I was a little nutty a year ago talking about [indiscernible] Our belief you know, my belief is that physical AI would be sort of the first business use case out of the AI that we're seeing sort of hundreds of billions of dollars of capital spend, but it's not necessarily certain where's the GDP growth, where's the true revenue coming from that. And my view has been that physical AI is where we're going to start to see that.

It's still obviously very early. And so that is going to be one of the big transformational things that we see. And obviously, we're just in a great position We've shown that we can make auto grade magnets, and so making magnets for those use cases actually material easily easier, not to be complacent about it. And so I think the question is just how do we want to grow the business? But we'll do it thoughtfully We're certainly not going to rush because first and foremost, you have to execute execute well for people or you don't get, to grow the business. And so it's not a question of lack of growth. Again, I go back to the comment, Lawrence, that I made on Paul and I kind of say this jokingly in jest, but then I actually really say it seriously, which is can you be a you know, sort of one of these exciting defense tech robotics drone, eVTOL companies raising capital at enormous valuations and not have a very specific answer of where your supply chain is coming from because your defense tech So saying, saying my supply chain comes from China solely is not an answer that someone can really fund over the long term.

And so obviously, I think that that positions us very well. And you know, we'll be thoughtful about about, how we grow that business.

Thank you. Thanks.

Our last question comes from Lianne Hayder with Canaccord. Please unmute your line and ask Good afternoon, everyone. Thanks so much for taking my questions. Mentioned stronger midstream run rate production going forward. When you expect to reach run rate production of 6,000 tonne tons of NDPR? And additionally, where do you expect the steady state cost NEPR production per kilogram to land?

We will try to get there to the run rate as fast as we can. You know, within the confines of what I said earlier in terms of balancing cost efficiency, long term stability But certainly, we expect significant improvement and progress this year towards that.

And Lianne, on the cost side, I think we've given you guys quite a few building blocks over time to triangulate where we think our our run rate cost structure will be there are obviously puts and takes since we provided initial guidance in 2020 or 2021 on rough order magnitude of costs. But our conviction in being a low cost producer globally remains and remains extremely strong. Given all the progress that we've seen. Obviously, Michael's spoke at length now on this call about the various you know, hurdles ahead of us of that that we intend to knock down. And as we do that Certainly, I think the math will prove itself out that Mountain Pass and its position on the cost curve is about as strong as it gets.

Got it. Thank you very much.

That concludes the question and answer portion of today's call. I will now hand the call back to Mr. Litinsky for closing remarks.

Thanks. As as I said earlier, I think it was a really remarkable 2024. 2025 is off to a terrific start. And so we will get back to work like usual, and we forward to speaking to you all next quarter. Thanks.